Paper/Article/ Project/ Monograph   Manuscript Submission:   The manuscripts in all the subject areas are welcome. Moreover, submitted manuscript must original and  not be previously accepted or published elsewhere. 

Easy Steps to Submit: –   

  • First Download Journal – Submission Template   –  prepare your full paper/article in it with proper setup.  (As per Author Guidelines > Manuscript File Format )
  • Download Undertaking Form  
  • Submit  Online.   –       (upload  Paper File  &  Undertaking Form)
Submit Paper / Article online                    ( click on )   =>
DOWNLOAD –  Submission Template     ( word file )  => CLICK HERE TO DOWNLOAD@
DOWNLOAD –   Undertaking From    =>
DOWNLOAD  –   ‘No-Conflict of interest declaration’   Form  =>
Publication – Subject Categories – Research Area  /  Fields
Monograph  Submission Template (word file) CLICK HERE TO DOWNLOAD@
Sample papers / articles   (For example only)        ( click on )
Check Plagiarism before submit                             ( click on )
Menus for Authors     /     FAQs
Article/ Paper Processing Charge / Fee   (APC / PPC)
Pay Processing Charge / Fee online

Submit the paper/article electronically as attachment:   SUBMIT ONLINE    or  send on E-mail ID of the Managing Editor as per all instructions following as under.

Manuscript Submission File Format  ( EASY FOR SETUP ) :

Language: Language of the articles should be only in English.   [ If few line-words-quotes are in any other languages  then  mention its English translation in  (…) bracket just beside / after ]

File Type: Authors should submit the articles only in MS-word format doc. / docx.(editable),

Page Format:  A4 pages,  Single column – single spaced type,  line spacing – 1.0 , Narrow margin.


Theory – Contents fonts size : TITLE – 20 points and Bold,  subtitles –  11 points  and Bold,  Contents – 11 points,  theory text – 11 points.

Figures/ Tables/Charts: (with numbering eg. 1, 1.1, 2, 2.1) at proper place and in center.

Size of Submission: Paper / Article file should be approx. 2 to 10 pages / 1000 to 5000 words / 5 MB as per mentioned publication charge  on website.  ( For above limit file publication charge will be extra),   In any case the size of the file should never exceed 30 pages/15000 words/15 MB owing to file restriction implied. 

Evaluation of Paper / Article: The following criteria are observed and points are calculated (out of total 10) for each criteria.

  • Relevance of Topic  /  Importance of Topic
  • Scholarly Quality of Contents, Theory, Information
  • Use of Theory, Literature Review, Methodology
  • Novelty and Originality 
  • Technical Content and Correctness 
  • Critical Qualities – Method, Analysis, Discussion, Result, Reviews
  • Appropriate Titling of Section Headings –  Content sanctioning
  • Clarity of Conclusion / Summary / Result
  • Usage of  English Grammar / Language / Chart / Table / Figures etc.
  • Appropriate use of – References/ Bibliography, Websites/Webpage  etc.

EXAMPLE : Structure of Research Paper/Article :  (author may add subtitles in middle part of research paper /article as per  topic /contents)   

  1. Title of the Paper / Article
  2. Author’s Name, Email, Contact Number, Designation, University/College, State, Country.
  3. Abstract
  4. Keywords or Phrases (4 to 10)
  5. Introduction
  6. Literature Review
  7. Objectives / Aims    (if any)
  8. Research Method /  Methodology  
  9. Analysis  –  Discussion 
  10. Findings
  11. Recommendations    (if any)
  12. Limitations    (if any)
  13. Conclusion / Summary
  14. Acknowledgment  (Fund, Grant, Guide, Supervisor etc.)
  15. References or Bibliography   –    numbering  style without bracket.  (Minimum 4-5)
  16. Author’s Biography (Maximum 100 words)

Example Submission Order:  (subtitles with descriptions for example only)

(All sub titles/points can be as per different subject and topic of research so; Author may use contents, wording matter, charts, etc. as per  topic or  subject )

Abstract: This section should detail the problems, experimental approach, major findings and conclusion in one paragraph and should appear on the second page. The abstract should be 100 to 250 words in length. Complete sentences, active verbs and the third person should be used. The abstract should be written in past tense. Standard nomenclature should be used and abbreviations should be avoided.  Avoid abbreviation, diagram and references in the abstract.

Keywords: Author(s) must give 4 to 10 key words which can identify the most important subjects covered by the paper. They must be placed at the end of the abstract. A list of non-standard abbreviations should be added. In general, non-standard abbreviations should be used only when the full term is very long and used often. Each abbreviation should be spelt out and introduced in parentheses the first time it is used in the text. Only recommended SI units should be used. Authors should use the solidus presentation (mg/ml), Standard abbreviations (such as ATP and DNA) need not be defined.

Introduction:  The introduction should set the tone of the paper by providing a clear statement of the study, the relevant literature on the study subject and the proposed approach or solution. The introduction should be general enough to attract a reader’s attention from a broad range of scientific disciplines, abbreviations should be included. The manuscript should include the purpose of the investigation and relating the manuscript to similar previous research. Only information essential to the arguments should be presented.

Materials and Methods: This section should provide a complete overview of the design of the study. Detailed descriptions of materials or participants, comparisons, interventions and types of analysis should be mentioned. However, only new procedures should be described in detail; previously published procedures should be cited and important modifications of published procedures should be mentioned briefly. Capitalize trade names and include the manufacturer’s name and address. This section must contain specific details about the materials studied, instruments used, specialized source and related experimental details which allows other research worker to reproduce the results. Obtain permission for all fully borrowed, adapted, and modified tables and provide a credit line in the footnote. Results and Discussions The results should be concisely presented. Results and discussion may be separate or combined based on the author’s requirement. Tables and figures should be designed to maximize the comprehension of the experimental data. The interpreted results should be explained clearly in discussions and should relate them to the existing knowledge in the field as clearly as possible. Tables, Graphs and figures (Illustrations) should be inserted in to the main text at respective place they should appear when published and should have appropriate numbers and titles with an explanatory heading. Labels of the table, graph and figures MUST be in the text form and should not form part of the image. Colour photographs and illustrations (line drawings, halftones, photos, photo micro-graphs etc.) must be clean originals or digital files would be charged that may be intimated along with the acceptance letter. Those photographs must be clear and sharp. Digital files are recommended for highest quality reproduction.

The Discussion should interpret the findings in view of the results obtained in this and in past studies on this topic. State the conclusions in a few sentences at the end of the paper. The Results and Discussion sections can include subheadings, and when appropriate, both sections can be combined.

Results should be presented with clarity and precision. The results should be written in the past tense when describing findings in the author(s)’s experiment. Previously published findings should be written in the present tense. Results should be explained, but largely without referring to the literature. Discussion, speculation and detailed interpretation of data should not be included in the results but should be put into the discussion section.

Acknowledgement (if any): This section can be kept at the end of the manuscript before reference section. This section can be used to acknowledge the help of those who do not qualify for authorship or to acknowledge funding, donated resources or significant contribution to the research.

References/Citations: (APA/MLA/IEEE/Chicago – Style as per study field)  References to the literature cited for the manuscript should be numbered in order of appearance in the manuscript and cited in the text with superscript numbers.      

Study field  – style :  

Citation – References style  : –

Journal papers:  


  1. Author’s Name (Year);  “Paper/Article Title”,   Journal Name / Publication Name,  Volume, Issue, Page Number.  [If any Available Link (DOI/DOIs/EOI) ]


  1. Amie U. (2021): Cleavage of structural proteins during the assembly of the head of bacteriophage, International Journal for Innovative Research in Multidisciplinary Field, Vol-8, Issue-10,  Pp.100 – 110.

Books :

  1. S.Gupta.(2006): Introduction to Operations Research, 3rd. Ed. McGraw Hill Inc, 34-96. .
    Book chapter: Botkin, J,(2006):  What do you meant by Ecosystem in : Environmental Science of Living Plater, 3rd edition, Pp. 14-48,  E-age Publishing, New York. .

Conferences/proceeding paper : 

  1. Tony S, (2001): “Geospatial technology for disaster management”, International Conference on Disaster Mitigation and Management, PSNA College of Engineering and Technology, Dindigul, Pp. 234-238.

Web References :

  • Roshan J, (2007): How to draw in Computers. RCSP Publishing.  Accessed 26 June 2010.

Tables should be kept to a minimum and be designed to be as simple as possible. Tables are to be typed double-spaced throughout, including headings and footnotes. Each table should be on a separate page, numbered consecutively in Arabic numerals and supplied with a heading and a legend. Tables should be self-explanatory without reference to the text. The details of the methods used in the experiments should preferably be described in the legend instead of in the text. The same data should not be presented in both table and graph forms or repeated in the text.

Figure legends should be typed in numerical order on a separate sheet. Graphics should be prepared using applications capable of generating high resolution GIF, TIFF, JPEG or PowerPoint before pasting in the Microsoft Word manuscript file. Tables should be prepared in Microsoft Word. Use Arabic numerals to designate figures and upper case letters for their parts (Figure 1). Begin each legend with a title and include sufficient description so that the figure is understandable without reading the text of the manuscript. Information given in legends should not be repeated in the text.

Equations: All equations should be numbered in order from starting and the notations used in the various equations should be given after abstract. Authors are insisted to follow standard notations and SI units system even though it’s not mandatory.

Images: Images should be supplied without being inserted in tables, borders or any other format, they can be copy pasted in the required space. It will be better if the images are given in the last page, the quality of the image and the size should be proper.

Citing References in the Text: References must be cited in the text in superscript digits at end of sentence or paragraph before punctuation or full stop1. In case of two or more references, separate the superscript digits by comma1,2,6. Moreover, If there are more references but in continuous numbers then use dash between superscript digits2-6. Citation may be direct or indirect.

Plagiarism Check:  Authors can ensure the manuscript in Good quality plagiarism software/ tools to check similarity  that would not be more than 20% including reference section. In the case of exclusion of references, it should be less than 10%.   Minimum 80% originality is require for a scientific paper/article. 

Final version of paper/article with corrections and submission:  On the acceptance of paper/article manuscript, final version of paper/article must be prepared into our submission template with proper setup as per above guidelines, author can ensure its originality, spelling corrections, references – citations etc. 

Indexing of Published Paper/Article file:  Published authors are advised – requested to add details of your paper/article in your Google Scholar, SSRN, Publons, ResearchGate, Academia, etc. free Indexing web portals (as a self indexing in your/author’s own profile).  Journal & Publisher does not take any responsibility of indexing on other web portals as other open indexing websites are not in our journal / publisher control or domain.  

Submission Email:        or      Submit Online 


The Managing Editor: